Heat pumps in Giessen and Central Hesse

Advice, planning and installation from one source – with 30 to 80% funding after the 2026 BEG reform. Costs, process and answers for Giessen and Central Hesse.

Request a quote Start funding check

The essentials at a glance

  • €25,000–35,000 before fundingAir-to-water heat pump, single-family house, fully installed
  • 30–80% subsidy (max. €22,400)BEG funding since 21 July 2026 – we advise you on it
  • 3–5 days of installation6–12 weeks in total including funding approval and delivery
  • 5-year warrantyOn our installation, in addition to the manufacturer's warranty

Houses in Giessen, Wetzlar and Marburg are mostly from the sixties to the nineties: radiators, gas or oil boilers, moderate insulation. Exactly the houses in which a heat pump works today – if it is planned properly. We measure instead of guessing, quote a fixed price and advise you honestly on funding.

Is a heat pump suitable for your house?

The year of construction matters less than four technical questions. We answer them on site in about an hour:

  • Flow temperature: do the radiators keep the house warm at 50–55 °C? We calculate this room by room (heat load per DIN EN 12831). Usually one or two radiators need enlarging – not the whole house.
  • Insulation: good insulation lowers running costs but is not a prerequisite. High-temperature heat pumps deliver 65–75 °C if needed.
  • Space: about 1 × 1.5 m outside for the outdoor unit, roughly a fridge-sized spot inside, plus a buffer tank.
  • Electricity: a separate meter for a heat-pump tariff lowers your electricity price by around 20%. We coordinate this with your network operator.

Which heat pump fits?

Air-to-water Our standard

Draws heat from the outside air. No earthworks, installed in a few days, suitable for most existing houses.

Cost€25,000–35,000
Efficiency (SPF)3.5–4.5
Funding30–80%

Brine-to-water

Geothermal energy via borehole or ground collector. Quieter and more efficient, but more expensive and dependent on the plot.

Cost€35,000–50,000
Efficiency (SPF)4.0–5.0
Funding30–80%

Hybrid

Heat pump plus existing gas boiler for the coldest days. Pragmatic for poorly insulated houses.

Cost€22,000–30,000
Heat-pump share70–80%
Fundingheat-pump share

What does a heat pump cost in Giessen?

25–35 k€Air-to-water, fully installed
35–50 k€Geothermal incl. drilling
~1,500 €Electricity per year, single-family house
5 yrsWarranty on our installation

The price includes the unit, buffer tank, hydraulics, removal of the old boiler, electrical connection, hydraulic balancing and commissioning. What moves the price: the heating capacity, radiator changes, the length of the pipe runs and whether a new electricity meter is needed. You get all of it in one fixed-price quote – on request with an estimate of the funding that applies to you.

Funding 2026: 30 to 80% subsidy

30 %Basic subsidyfor every heat pump
+16 %Climate-speed bonusfor owner-occupiers replacing an old oil or gas heating, until 31 Jan 2027
+up to 40 %Income bonusfor owner-occupiers: 40, 30 or 10 % depending on household income
=max. 80 %Maximum rateon up to €28,000 eligible costs for the first residential unit

As of October 2026 · BEG, KfW programme 458 · Rates change regularly – we check them before every quote.

The federal heating funding (BEG, KfW programme 458) was reformed on 21 July 2026: the efficiency bonus was dropped, the income bonus is now staggered and the climate-speed bonus fell from 20 to 16 percent. The basic subsidy applies to everyone, also landlords. Climate and income bonus are for owner-occupiers only.

ComponentRateCondition
Basic subsidy30%Every heat pump, every applicant
Climate-speed bonus16%Replacing a working oil, coal or night-storage heating or a gas central heating at least 20 years old; applications until 31 Jan 2027, then −4 points every six months
Income bonus40 / 30 / 10%Taxable household income up to €30,000 / €40,000 / €50,000; households with a minor child deduct €10,000
Maximum80%Eligible costs €28,000 for the 1st residential unit (max. subsidy €22,400), +€15,000 for the 2nd–6th, +€8,000 from the 7th
Example: family house in Giessen, 25-year-old gas boiler, air-to-water heat pump for €30,000
  • Household income €45,000 → 30 + 16 + 10 = 56% of €28,000 = €15,680 subsidy, own share about €14,320.
  • Household income €38,000 with one child (counts as €28,000) → 30 + 16 + 40 = 86%, capped at 80% = €22,400 subsidy, own share about €7,600.

Good to know: the funding application must be submitted before the work starts; a contract can be concluded subject to funding approval. KfW offers a low-interest supplementary loan for the remaining amount. We are happy to discuss which components apply to you.

How it works – five steps

  • 1Week 1

    On-site visit & heat-load calculation

    We look at radiators, pipework, electricity and the installation site, measure the rooms and calculate the heating capacity your house really needs.

  • 2Week 1–2

    Fixed-price quote

    You receive a detailed quote without hidden extras – on request with an estimate of the funding you may qualify for.

  • 3Week 2–3

    Funding application & contract

    You submit the application in the KfW portal – we advise you and provide the technical details. Tip: the contract can be concluded subject to funding approval.

  • 4Week 6–10

    Installation in 3–5 days

    Old boiler out, heat pump, buffer tank and hydraulics in, hydraulic balancing. In the heating season we provide temporary heaters if needed.

  • 5Commissioning day

    Handover

    Function test, instruction on the controls and all documents – including those you need for the funding payout.

Before you sign: four questions to settle

Settle these four questions before you accept any quote. Here are our honest answers – without naming other companies.

Which kinds of providers install heat pumps?

Essentially four: the local master-certified heating contractor, online full-service providers, manufacturer partners and energy consultants.

Local master-certified contractorPlans, installs and services the system with its own fitters. One contact before and after installation.
Online full-service providerPrice based on online details; installation is often done by partner companies from the region.
Manufacturer partnerInstallers who mainly fit one brand. Good product knowledge, smaller choice.
Energy consultantAssesses the house and prepares the renovation roadmap – but does not install anything.

What is a realistic price?

An air-to-water heat pump for a single-family house usually costs €25,000 to €35,000 before funding; a ground-source heat pump with borehole €35,000 to €50,000.

Funding covers 30 to 80% of eligible costs of up to €28,000 for the first dwelling (as of October 2026). Our funding check calculates your own share.

What should I look out for when choosing?

Five points decide whether the heat pump runs efficiently for 20 years:

  • A room-by-room heat-load calculation (DIN EN 12831) instead of an estimate per square metre.
  • Hydraulic balancing and a flow temperature of no more than 55 °C written into the quote.
  • A planned installation site: at night 35 dB(A) must not be exceeded at the neighbour’s window.
  • A fixed price covering every item: removal of the old boiler, electrical connection, foundation, commissioning.
  • One permanent contact for servicing and faults after installation.

What should I steer clear of?

Three warning signs:

  • Quotes without a site visit and without a heat-load calculation.
  • Promises such as “funding guaranteed” – only the KfW decides on funding.
  • Bait prices that leave out removal, electrical work or the foundation.

Frequently asked questions

In most cases, yes. What matters is whether the radiators are large enough for flow temperatures of 50–55 °C. We check this with a heat-load calculation; often enlarging one or two radiators is enough. High-temperature heat pumps deliver up to 75 °C if needed.

Current units produce around 30–40 dB(A) at three metres – comparable to a quiet fridge. We plan the installation site so that the limits towards neighbours (35 dB(A) at night in residential areas) are safely met and use sound-insulation hoods where necessary.

Installation takes three to five working days. Including consultation, quote, funding application and delivery, allow six to twelve weeks in total.

First the quote, then the application in the KfW portal, then the installation. A contract can be concluded subject to funding approval. We advise you and provide the technical details; after commissioning you upload the invoice and documentation and KfW pays the subsidy.

For a house with 20,000 kWh of heat demand and a seasonal performance factor of 3.5 you need about 5,700 kWh of electricity per year. With a heat-pump tariff this costs roughly €1,400 to €1,700 – usually less than the previous gas or oil costs.

Yes, many air-to-water heat pumps offer passive or active cooling via underfloor heating or fan convectors. We advise you on whether this makes sense for your house.

Once a year: checking the refrigerant circuit, filters, pressure and settings. We offer maintenance contracts so that the system runs efficiently and the warranty is preserved.

Are we the right partner for your project?

Let's find out together. Contact us for a no-obligation consultation.

Request a quote 0641 97 24 41 49